FlexTT5-Nikon E Release Firmware License (CE/Europe)
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Please be sure to check camera compatibility below before purchasing.
You will need at least 2 radios with E Release Firmware.
Each radio requires its own Firmware License.
The E Release upgrade is not available for the MiniTT1 at this time.
You can use a FlexTT5 as a transmitter in place of the MiniTT1.
This license is for a CE frequency (Europe, Asia, Australia) Transceiver. If your radio says "FCC" on the label,
please purchase an FCC license instead.
Important information: Please make sure you enter your email address correctly at checkout. The license(s) will be assigned to that email address. After purchase, you will receive a confirmation email from *LPA Design* (PocketWizard's parent company) with further instructions. The upgrade is completed through the PocketWizard utility via a USB connection with a computer, either a PC or Mac. It cannot be done on a smartphone or tablet. You will need a mini B to USB data cable for the upgrade. An upgrade must be purchased for each radio and will be assigned to the radio's serial number upon installation. Once assigned, it is non-transferable.
What you need to know
Please scroll down on this page for the compatibility chart. You will find 4 categories:
TTL Compatible: This means you can use the radios as transmitters or receivers with full TTL communication.
Not Currently Compatible* (as a transmitter): this means you cannot use the radio as a transmitter for TTL but it can be used as a receiver with TTL if you use a Raven by Fusion TLC as the transmitting radio.
TTL Compatible** (as a receiver): This means you will have full TTL communication when you use the radio as a receiver if you use a Raven by Fusion TLC as the transmitting radio.
Basic Trigger Only - no TTL: This setting in the Utility is available with Legacy firmware only. It uses just the center pin trigger and is compatible with virtually any camera on the market. The camera must be able to trigger with a single sync pin through the hot shoe. There are a couple cameras (the original Canon T7 and SL3) that do not have a center pin. PocketWizard radios cannot work with those units. The camera's hot shoe must be active. If you have any trouble, please see this Wiki page.
The radios are TTL compatible with the following Nikon flashes:
A unit upgraded with the E Release is compatible only with other PocketWizard radios that have also been upgraded. Be sure to use the same generation of E Release firmware-either the newest versions which may be in Beta or the lowest firmware numbers available in the Utility.
Once you update to the E Release firmware, the unit is licensed forever. It can be downgraded to Legacy PocketWizard firmware at any time for use with your other PocketWizard radios. Re-upgrading to E Release can be done at any time with minimal effort.
Directions on how to upgrade and what you need
You will need:
*Compatible PocketWizard radio (FlexTT5 for Nikon)
* PocketWizard Utility version 2.10 or above
If you do not have this Utility version please click here
* An internet connection at time of update
* USB A to Mini-B cable
* A computer - PC or Mac. The upgrade cannot be done using a tablet or smartphone.
* An upgrade license for each PocketWizard radio. Select link above to purchase license(s). The license(s) will be assigned to the email used for the purchase transaction. Please make sure you enter your email address correctly. Upon successful purchase, you will receive a confirmation email with instructions.
After Purchase - Step by step instructions:
Ensure you are connected to the internet.
Launch the PocketWizard Utility.
Connect your PocketWizard radio to your computer with USB cable. The upgrade must be done with a PC or Mac.
Click Update Firmware.
Select E Release Firmware.
Enter your email address used for the purchase in the field provided, and click Find and Apply License.
Proceed to install the firmware. Once installed, the license will be tied to that serial number and it is non-transferable.
Update other units as needed.
You may downgrade at any time following the same instructions and selecting to install Legacy Firmware. Once the E Release is assigned to a serial number, it can be uninstalled and reinstalled at any time.
Why you should upgrade
The E Release extends the range, enhances reliability, and expands the features of your existing PocketWizard radios. Check out our Wiki E Release Page for more detailed information.
Extends Your Range
Trigger your flash(es) and/or remote camera(s) from remarkable distances.
Expands Your Features
We've added 12 more TTL capable channels to the FlextTT5 totaling an impressive 32 Channels.
Our radio frequency is less crowded than others and works great in "noisy" environments. We've made it even more reliable with the E Release. We don't want you to miss a single shot.
Once the user has seen at least one product this snippet will be visible.